Wall Formwork System StarTec

StarTec: The Strong Multi-Purpose Formwork

The sturdy multi-purpose wall formwork system per se. Large panel sizes up to 3.30 m, 100 % compatible with the hand-set system AluStar. Over 30 years proven track record in civil engineering and commercial and residential construction. For sale and rental. Available also from authroized MEVA partners. 

StarTec is also available as a pre-assembled safety system, ready-to use and complete with platforms, guard-railings and ladder access: StarTec-Securit safety system.

Features & Benefits
Complementary systems
Technical Data

Features & Benefits


Panel heights 330, 270, 135 and 90 cm, panel widths from 240 to 20 cm; for vertical or horizontal use

  • Reduction of filler areas
  • Fast adaptation to building layout

90° and 135° inside and outside corners and steplessly adjustable articulated corners from 60° to 180°

  • All corner configurations formed with standard corner panels

Concrete Pressure

Maximum load capacity is 60 kN/m² (German standard DIN 18218, table 3, line 7)

  • Unlimited pour speed to panel height irrespective of concrete recipe and consistency or climate conditions

Panel frame

Frames made of closed high-strength steel profiles

  • Torsion-proof, durable

High-quality powder coating with additional priming and cavity sealing

  • High corrosion protection
  • Less cleaning effort due to reduced concrete adhesion

270 cm and 135 cm wide panels with bump notch

  • Easy adjustment and alignment with prybar

Multi-function profile

Practical MEVA multi-function profile with welded-in Dywidag nuts

  • Easy attachment of accessories such as alignment rails, braces, walkway brackets etc.

Tie holes, panel connections

Tie hole with conical steel sleeve, welded in from both sides

  •  Easy use of DW15 tie rods
  • Durable; tieing through even with slanted formwork

3 tie holes per panel height 330 cm, 2 per height 270 cm, 1 per height 135 and 90 cm; symmetrical Arrangement

  • Uniform tie hole and joint pattern

Panel 270/240 with tie holes inside panel; panel height 135 cm with centred tie hole at top and bottom

  • Optimised for vertical and horizontal setup; even with stacked Panels

Panel connection with compact developed assembly lock: one piece, weighs only 2,0 kg

  • Time-saving assembly, joins and aligns panels steplessley with a few hammer blows, fits anywhere on the Frame
  • No losable parts

100 % Wood-free facing alkus

All-plastic facing alkus, no swelling or shrinking

  • No change in dimensions due to moisture; no rotting or fungal decay; durable
  • Built in flush with panel frame; improved and consistently even concrete surfaces from the first pour to the last

Easy repair of scratches or drill holes etc. on site with the same polypropylene material

  • No down times for repairs
  • Permanent availability of panels

Screwable and nailable without chipping off of top layer

  • Easy handling

The alkus facing lasts as long as the Frame  

  • No re-facing necessary and thus no disruptions of work flow
StarTec Wall Formwork Features & Benefits


  • Large construction site in the heart of Budapest

    MEVA fulfils stringent requirements with flexible formwork solutions. The Budapest Zoo & Botanical Garden is one of the Hungary’s most popular cultural attractions.

  • Challenging tunnel geometry

    MEVA STB 450 offers flexible solution for narrow, inclined rail section: Near the municipality of Gretzenbach, the four-track route branches into two separate lines. Here, the two southern tracks gradually descend and pass below the cantonal road before entering the new Eppenberg Tunnel.

  • High above Manchester

    Four apartment buildings at heights up to 202 m by 2020: the city centre redevelopment project Deansgate Square. In use for a total of 194 storeys: the automatic MAC climbing system from MEVA

  • Large northern bypass around Zurich

    In Zurich the motorways cross each other from all directions. Every morning and evening in this densely populated region the heavy through and long-distance traffic is joined by commuter traffic.

  • Motorway bridge: STB 450 showing its strength even when lying horizontally

    The STB 450 has often proved its strength when being used vertically to support walls. For a motorway bridge north of Frankfurt it is being used horizontally for the bridge piers.

  • Rosemont Hotel skyscraper with 7,000 m² indoor rain forest

    Putting superlatives on Dubai’s skyline continues with the construction of the Rosemont Hotel and Residences on Sheikh Zayed Road.

Complementary systems

  • KAB: Foldable Safety Climbing Platform

    MEVA foldable working and climbing platform. It is delivered to the site folded and pre-assembled and can be used as a climbing platform.

  • BKB: Platform for Safe Pours

    MEVA pouring platforms, walkway brackets and comprehensive safety accessories make your concrete pours safer and faster. The pouring platform is simply swung into position on the AluStar, StarTec, Mammut or Mammut 350 wall formwork panels.

  • StarTec-Securit Sicherheitssystem: Sicherheit kompakt

    Komplett vormontiertes, aufklappbares Sicherheitssystem StarTec-Securit für MEVA Wandschalung StarTec. Mit Betonierbühne, Rückenschutz, Leiter und Durchstiegsluke. Rutschfester Riffelblechbelag.

  • SecuritBasic: Safety System for MEVA Wall Formwork

    Comprehensive, modular safety system for MEVA wall wall formwork systems. Easy, standard attachment to the multi-function profile. Baukastensystem mit Betonierbühne, Rückenschutz, Frontgeländer und Durchstiegsluke mit Leiter und Stirngeländer. Befestigung an der Funktionsstrebe des Wandschalungssystems. Richtkonsolen am Rücken der Laufkonsole, dadurch keine Unterbrechung der Arbeitsbühne.

  • Push-pull props R and bracing brackets SRL for wall formwork

    Push-pull props R and bracing brackets SRL are used to align and support wall formwork. Push-pull props SRL have left- and right threaded spindles. The brace bracket 250 consist of a push-pull-prop R 250 (190 - 320 cm) and bracing bracket SRL 120 (90 - 150 cm).

  • Circo: Strong circular column formwork for circular columns

    Circo is a robust steel system with integrated hinge joints for circular columns. It is available in 5 cm steps from 25 to 80 cm and in heights of 50, 100 and 300 cm. The two shells are closed using the standard M clamp.

  • MEVA FormSet MFS: stop ends, safety anchors

    MEVA FormSet anchors for single-sided formwork, stop end rail and stop end bracket for slab edges and cantilevering slabs with safety mesh for slab edge fall protection

  • Heavy-duty braces Triplex

    Modular system for heavy duty bracing. The brace lengths are variable and can be used to support and align high walls and columns beyond 6 m heights.

Request a Quotation


Invest in MEVA Used Formwork

MEVA Original Used Formwork

Rental Formwork

MEVA Rental Formwork
All Plastic Facing alkus
MEVA Frame Profile
... more than just formwork
  •  Select language

    Select continent and country. Language selection optional.

  •  Contact
  •  Search

    Search on our website.

  •  Newsletter

    Subscribe to our monthly newsletter.