Heavy-duty, high-performance clamp formwork system with 2,025 psf load capacity for fast, high-efficient pours. Time and cost-saving assembly on all industrial and engineering jobs. Achieve very large forming areas with just a few panels. Sturdy for maximum stability. Designed for optimum worker safety on industrial and civil engineering construction sites (imperial).
Panel size 12’x 8’ with a surface of 96 sq.ft. for floor heights of 12’ or 8’ with one panel used in vertical or horizontal position
Panel heights 12’, 8’, 4’ and 2’, panel widths from 8’ to 1’; for vertical or horizontal application
Articulated inside and outside corners are steplessly adjustable from 70°-220°. Stop points at 70°, 90° and 135°
Highest capacity: system designed for concrete pressure of 2,025 psf
Frames made of closed, high-strength hollow steel profiles
All horizontal cross stiffeners made of closed profiles
High-quality ACC coating technology
1/2 “ vertical tie-off bar, solidly welded between horizontal profi les on every panel
Transport holes
Large panels with bump notch
Practical MEVA multi-function profile with welded-in Dywidag nuts; additional multi-function profiles at tie hole level
Tie hole with conical sleeve, welded at both sides
Tie holes: 3 per panel height 12’, 2 per panel height 8’, 1 per panel height 4’ and 1 per panel height 2’; symmetrical arrangement
Panel connection with just one standard MEVA assembly lock for all panel connections: only 6.6 lb
All-plastic facing alkus, no swelling or shrinking
Easy repair of scratches or drill holes etc. on site with the same polypropylene material
Screwable and nailable without chipping off of top layer
The alkus facing lasts as long as the Frame
MEVA Formwork Systems, Inc.
2000 Airpark Drive
Springfield, Ohio 45502
United States of America