Wall Formwork EcoAs

EcoAs: The Modular Hand-Set Wall Formwork

EcoAs is a robust, modular wall formwork system for flexibility on residential and commercial construction sites, without a crane. It comes with the long-lasting, all-plastic facing alkus. Formwork for shafts and foundations, swimming pools and light industrial works. 

 
Features & Benefits
Modular andTime-Saving
References
Download
Complementary systems
Technical Data

Features & Benefits

Panel

Panel heights 300, 240, 160 and 120 cm, panel widths from 25 to 100 cm; for vertical or horizontal set up

  • Formwork projection always less than 40 cm  
  • Reduction of filler areas
  • Fast adaptation to building layout

90° inside and outside corners and steplessly adjustable articulated corners from 60° to 180°

  • All corner configurations formed with standard corner Panels

Panel 120/80 with alkus facing weighs only 33 kg

  • Easy assembly by Hand

Pressure

Maximum load capacity is 50 kN/m²  (German standard DIN 18218, table 3, line 6)

  • Unlimited pour speed to panel height irrespective of concrete recipe and consistency or climatic conditions

Panel frame

Frames made of closed, high-strength hollow steel profiles

  • Torsion-proof, durable

High-quality annealed powder coating with additional priming and cavity sealing

  • High corrosion protection
  • Less cleaning effort due to reduced concrete adhesion

Multi-function profile

Practical MEVA multi-function profile with welded-in Dywidag nuts

  • Easy attachment of accessories such as alignment rails, braces, walkway brackets etc.

Tie holes, panel connections

Tie hole with conical steel sleeve, welded in from both sides

  • Easy use of DW15 tie rods
  • Durable
  • Tieing through even with slanted formwork

3 tie holes per panel height 300 and 240 cm, 2 per panel heights 160 and 120 cm; centred tie holes in horizontal Setup

  • Record forming times of foundations
  • Convenient tie hole positions even for built-in foundation tapes

A push-pull strut can be attached at the panel joint to stabilize the panels when forming foundations

  • Top (wet) ties can be left out

Panel connection with compact MEVA assembly lock: one piece, weighs only 1,5 kg  

  • Time saving assembly, joins and aligns panels steplessly with a few hammer blows, fits anywhere on the Frame
  • No losable parts

All-plastic facing alkus

All-plastic facing alkus, no swelling or shrinking

  • No change in dimensions due to moisture; no rotting or fungal decay; durable
  • Built in flush with panel frame; improved and consistently even concrete surfaces from the first pour to the last

Easy repair of scratches or drill holes etc. on site with the same polypropylene material

  • No down times for repairs
  • Permanent availability of panels

Screwable and nailable without chipping off of top layer

  • Easy handling

The alkus facing lasts as long as the Frame  

  • No re-facing necessary and thus no disruptions of work flow
Technik & Vorteile der EcoAs Wandschalung
 

Panel connection

Panel connection

The MEVA clamp joins and aligns panels with just a few hammer blows. It provides a safe, stable panel connection, fits anywhere on the frame and is light and easy to handle.

Filler areas

Filler areas

Compensating filler areas is simple: up to 16 cm a filler timber and Uni clamp 11 are the only parts that are needed. Excess forming area is always smaller than 40 cm thanks to the panel size range. Filler areas are thus minimised, allowing optimum adaptation to the building layout.

Alignment rails

Alignment rails

are attached with flange screws 18 to the multifunction profile.

Attachments

Attachments
All accessories such as push-pull props, working platforms and accessories are attached with a flange screw to the welded-in DW threat in the multi-function profile. Walkway brackets have a pin which fits into the same DW thread and automaticalls locks into safe position. No additional parts are needed, reducing inventory and effort in handling and moving equipment.

Corners

Corners
All corners from 0° to 180° are covered by inside, outside and hinged 4 corners.

Dry ties

Dry ties
Foundations and small walls (e.g. for canals, swimming pools) can be formed with dry ties using a foundation tape and foundation tensioner below plus the push-pull strut 23 to replace the top tie.

Stop ends

Stop ends

save parts, reduce effort and save time using the stop end bracket 23/60. You simply fit it, tie the formwork – done!

 

Request a Quotation

 
 

Invest in MEVA Used Formwork

MEVA Original Used Formwork

Rental Formwork

MEVA Rental Formwork