Frame with multi-function and grip profile

Welded-in DW nut for simple attachment of all parts. Grip profile for easy-handling even when wet – in all AluFix, MevaLite and MevaDec panels.

Panel connection

The MEVA clamp joins and aligns panels with only a few hammer blows. It has no losable parts and is the lightest and most compact of its kind.

Facing fitted flush into the frame

Minimum imprint in the concrete finish thanks to the all-plastic facing alkus, which is fitted in flush with the frame. It never swells nor shrinks.

Closed hollow frame profile in all MEVA panelised formwork systems

In all MEVA wall and slab formwork systems the panel profile is closed, in steel and aluminium. Even the MevaDec prop head follows this principle. 

Closed hollow frame profile

Stable, torsion-free, sturdy.

Profile coating

State-of-the-art ACC-coating technology for best protection against corrosion.

 
 

Frame with multi-function and grip profile

Welded-in DW nut for simple attachment of all parts. Grip profile for easy-handling even when wet – in all AluFix, MevaLite and MevaDec panels.

1

Panel connection

The MEVA clamp joins and aligns panels with only a few hammer blows. It has no losable parts and is the lightest and most compact of its kind.

2

Facing fitted flush into the frame

Minimum imprint in the concrete finish thanks to the all-plastic facing alkus, which is fitted in flush with the frame. It never swells nor shrinks.

3

Closed hollow frame profile in all MEVA panelised formwork systems

In all MEVA wall and slab formwork systems the panel profile is closed, in steel and aluminium. Even the MevaDec prop head follows this principle. 

4

Closed hollow frame profile

Stable, torsion-free, sturdy.

5

Profile coating

State-of-the-art ACC-coating technology for best protection against corrosion.

6

MEVA FRAME PROFILE

Backbone of every panelised formwork system

The frame profile is the backbone of every panelised formwork system - literally. Its robustness, stability and flexural rigidity make a considerable difference in practice and its long lifespan. More important, they affect the system's concrete load capacity - and the speed and safety of your pour. MEVA developed the closed hollow profile that provides structural stability. 

Manufacturing expertise on-board and in-house production stands for continuous, top-notch performance from the idea to series production. All MEVA locations across the world are audited according to the European standard DIN ISO 9001 and offer our clients consistently high quality.

MEVA Frame Profile
 
Features and Benefits
References
Download

Features and Benefits

Closed Hollow Profile and Surface Coating

Formwork Panel Frames: Steel

MEVA uses a closed hollow steel profile in all its heavy-duty formwork systems. Being closed means it is more stable and torsion-free. Concrete cannot creep in anywhere. This makes cleaning and maintenance easier.  

 
 

Formwork Panel Frames: Aluminium

It was MEVA's idea to produce a closed double-chamber profile in aluminium that made aluminium formwork, with its weight advantages over steel, technically possible in the first place! The double chamber gives the profile the stability and robustness needed for formwork use. The frames are primed and coated using state-of-the-art powder coating technology. 

In addition, the MEVA hand-set wall formwork systems AluFix and MevaLite as well as the slab system MevaDec have an ergonomic grip profile which makes them easier to handle, even when wet. 

Tie holes, Dywidag thread, Clamp

All MEVA formwork systems are equipped with the same multi-function profiles to which all accessory parts are attached in the identical manner. Its unique feature is a Dywidag nut that is welded in on both sides to give it a sturdy and long-lasting hold. Welding it in prevents it from moving as may be the case with conventional beading. This enhances zero-error and safe assembly. It also means that working platforms are firmly attached and cannot slip away.  

The tie holes with conical sleeve allow you to tie panels even when they are slanted. 

The original panel connection from the inventor of the clamp! It was MEVA who invented and initially patented the formwork clamp in 1977. The clamp joins and aligns formwork panels, creating a structurally effective link between one frame and the next. You need only a few hammer blows to secure the connection. The clamp has no losable parts and is the lightest and most compact of its kind to this day. What's more, it can be placed anywhere on the frame, allowing you to connect panels even on uneven ground. 

Flush Panel Facing

MEVA formwork panels leave minimum imprint on the concrete surface. In contrast to conventional plywood facing, the all-plastic facing alkus is fitted flush with the panel frame. And since the 100 % wood-free facing does not swell or shrink, the flush fit stays for its lifetime.

Panel Size

MEVA offers you the choice of 10 wall systems with the industry's most comprehensive selection of panel sizes. This gives you maximum flexibility and ensures minimum effort for compensation and filler areas. Optimised logistics save time and money. 

US tie-off bars

The American wall systems MevaLite and Imperial features welded-in tie-off bars for optimum worker safety and easy handling. All MEVA systems are designed and built following strict OSHA standards. 

Tie-off bars US formwork system Imperial MEVA

Request a Quotation

 
 

Invest in MEVA Used Formwork

MEVA Original Used Formwork

Rental Formwork

MEVA Rental Formwork